Make An Offer

Complete this form & send us your details.

System Details

Waters Classic TUV SO Binary UPLC System

Item Acquity TUV SO
Manufacturer Waters
Price Please Call
Warranty 12 month On-Site Warranty (UK)

Optional Extras


The Acquity system comes complete with OQ Certification.

  • The binary pump has been tested for faulty parts such as seals and check valves
  • The detector has been tested for wavelength accuracy
  • The sample manager has been tested for area of reproducibility

Warranty Terms & Conditions For Used Equipment

Note: Our warranty terms quoted for this system apply to mainland UK customers. For clients outside of this locale, please enquire at point of sale. (Jaytee Biosciences Ltd) warranty all reconditioned instruments for a pre-agreed period. This period can be from 30 days to 1 year from the date of installation / delivery of the instrument. Generally newer equipment has a longer warranty than older equipment.

Additional warranty periods can be negotiated at the time of purchase if required.

The list below outlines the items covered by our warranty:

Parts Included In Warranty

  • Electronic Assemblies – e.g. PCB’s, Transducers, Interface Cards
  • Mechanical Assemblies – e.g. Pump Drive assemblies, XYZ Transport Systems
  • Power Supplies – e.g Low and High Voltage Supplies, Lamp Supplies, Cases, Metalwork and Enclosures.
  • Major assemblies – PCB’s, Power Supplies, and Displays etc covered for warranty term.

Typical Parts NOT Included In Warranty

HPLC Pumps

  • Plungers
  • Plunger Seals
  • Check Valves
  • Check Valve Cartridges
  • Frits
  • Purge Valve
  • Solvent Filters
  • Gaskets
  • Wash Seals
  • Degasser fluid parts
  • Gradient Valves

HPLC Detectors

  • Cell Assemblies
  • Cell Rebuild Kit
  • Lamp Assembly


  • Needle
  • Needle Seat
  • Needle Seat Holder
  • Rotor Seal
  • Stator Face
  • Isolation Seal
  • Plunger
  • Plunger Seals
  • Syringes

GC Autosampler

  • Syringe
  • Liner
  • Septa
  • Jet
  • Ferrules
  • Column Fittings
  • Gas Filters

Gas Chromatograph

  • Syringe
  • Liner
  • Septa
  • Jet
  • Ferrules
  • Column Fittings
  • Gas Filters


  • Wetted Path Components
  • Software Updates
  • Tubing and Fittings
  • Capillaries
  • Consumable Parts
  • Tools
Download Classic Acquity OQ and Reproducibility data

This Waters® ACQUITY UPLC® System provides an integrated configuration for solvent and XYZZ sample management designed for use with ACQUITY UPLC chemistries. Complete with an OQ certification - see photos.

Includes fully reconditioned and serviced:

  • Waters Acquity Classic Binary Solvent Manager (BSM)
  • Waters Acquity Classic Sample Manager (SM)
  • Waters Acquity Classic UV Detector (TUV)
  • Waters Acquity H-Class Column Manager (CM-A)
  • Waters Acquity H-Class Auxiliary Column Manager (CM-Aux)
  • Waters Acquity Classic Sample organiser (SO)
  • Bottle Manager

Optional extras (enquire for price):

  1. Acquity PDA (Diode Array Detector)
  2. CH-30A Column Heater

We can supply software, PC printer and installation - please call +44(0)1227 265333 for a full quotation. Contact Us

System Specification

Acoustic noise: <65 dBA

Operating temperature range: 4.0 to 40.0 °C (39.2 to 104.0 °F).

Operating humidity range: 20% to 50%, non-condensing.

Operating Voltage: 90 to 264 Vac

Frequency: 47 to 63 Hz.

External communications: Ethernet interfacing via RJ45 connection to host PC

Event inputs/outputs: Rear panel contact closure and/or TTL inputs/outputs.

BSM Specification

Number of solvents: Up to four: in any combination of two: A1 or A2 and B1 or B2.

Solvent storage: Solvents Tray accommodates up to four chromatographic solvents, two Sample Manager wash solvents and one Binary Solvent Manager seal wash solvent.

Solvent conditioning: Vacuum degassing (six-channel): one channel per solvent, and two channels for Sample Manager wash solvents.

Operating flow rate range: 0.010 to 2.000 mL/min, in 0.001 mL increments.

Compressibility compensation : Automatic and continuous.

SM Specification

Injection volume range: 0.1 to 50.0 µL, in 0.1 µL increments, partial or full loop mode. 10-µL loop is standard; 1, 2, 5, 20, and 50-µL loops also available.

Maximum sample capacity: 768 in two 384-well plates; expandable to up to 8,448 samples using Sample Organiser .

Number of sample injections: 1 to 99 injections per sample.

Injection volume range: 0.1 to 50.0 µL, in 0.1 µL increments, partial or full loop mode. 10-µL loop is standard; 1, 2, 5, 20, and 50-µL loops also available.

TUV Specification

Wavelength range 1: 190 to 700 nm

Wavelength accuracy: ±1 nm

Linearity range: Deviation at 2.5 AU ≤ 5%, propylparaben, at 257 nm

Baseline noise: 6 x 10-6 AU, at 230 nm, 10 mm shunt cell, 1.0 second filter time constant.

Drift : ≤ 5% x 10-4 AU/hour/°C, at 230nm

Sampling rate: Up to 80 points/s.

CM-A Specification

CM-A Column capacity: Two columns, as standard (maximum length of 150 mm with filter or guard column) or four columns (maximum length of 50 mm) can be supported with optional tubing kit, up to 4.6 mm internal diameter (I.D.).

CM-Aux Column capacity: Two columns (maximum length of 150 mm, with filter or guard column) .

Switching valves: Two nine-port, eight-position valves providing programmable, automatic, random access switching, waste and bypass positions for rapid solvent changeover

Column compartment temperature range: 4.0 to 90.0 °C, settable in 0.1 °C increments. Two independent heat/cool zones per module, up to six zones in stacked configuration.

Column compartment temperature accuracy: ±0.5 °C at sensor.

Column compartment temperature stability: ±0.3 °C at sensor.

Solvent conditioning: Active pre-heating as standard.

Column tracking: eCord™ Technology column information management tracks and archives column usage history.

2D support: Optional

CO Specification

Number of sample plates: Total of up to: 21 standard microtiter plates / 11 intermediate height plates / 7 deep-well (or 2-mL vial) plates / Combinations thereof.

CM-Aux Column capacity: Two columns (maximum length of 150 mm, with filter or guard column) .

Maximum sample capacity : Total of up to 8,448 samples: in 22 384-well plates, or seven 336 2-mL vials.

Temperature control: 4.0 to 40.0 °C, settable in 0.1 °C increments.

Plate exchange: <15 sec (retrieval and replace time)

Sample temperature control: At ambient temperature of 21 °C or lower, the sample organizer will maintain the temperature of the sample compartment down to 4 °C with a tolerance of -2/+6 °C, when configured with the maximum number of vials and/or plates; for ambient temperatures above 21 °C, there is a delta of 17 °C from actual ambient temperature.

Racks : 10 storage shelf assemblies supplied standard.

View Waters System Specification | View Waters TUV Specification

View all Acquity Systems

Note: Licenses for Waters software products are not transferable. Any customer who purchases Waters products are advised that in order to hold a valid license to use the Waters software, they must purchase a license and appropriate Application Manager directly from Waters.
Installation option available. Please note that all prices quoted are exclusive of UK VAT.

EnquireMake An Offer

Interest in System 108 - Waters Classic TUV SO Binary UPLC

Please enter your details.


Interested in renting this instrument:

Please add these 2 numbers:
RW9         34G      
K X    A      5   1FP
T 8   M4L   PJN      
E S    Q      I   HXT
6AN         SIH      
I wish to be contacted by Jaytee Biosciences
Ltd regarding this enquiry.
I am happy to be contacted in future by Jaytee Biosciences Ltd in related matters.


  • +44 (0) 1227 265333